DUMP BODIES

BIBEAU

Bibeau BFL

A perfect combination of lightness and ruggedness!

By far the most versatile of its category. Construction of AR steel with grades ranging from 250 Brinell to 500 Brinell, enables this body to perform remarkably well in robust conditions (excavating) while being significantly lighter than comparable bodies. Moreover, the steel used in its construction provides this body with an outstanding wear resistance factor as well as an impressive resistance to loading impacts.

Bibeau BMT

The ultimate strength!

By far the most rugged of its category. Built exclusively (body shell) of AR 450 steel, it is by far the best adapted to sustain repetitive abuse (heavy duty excavating, demolition). Moreover, the steel used in its construction provides this body with an ultimate wear resistance factor as well as the best resistance to loading impacts.

Bibeau EL-188 / EL-250

The ultimate high lift dump

Call CTE for your eliptical dump body needs. Made with Bibeau 450 steel and the inclusino of a high raise dump gate.

Bibeau MO

The most economical in its class!

This body is designed for light duty (sand & gravel) applications. Its construction, mainly of 44w grade steel (10ga to 1/4’’), enables it to do the job. Furthermore, the floor center piece, made from AR200 steel, significantly increases the wear resistance factor and also provides proportional strength to sustain the stress during the loading process

Bibeau M1

When economy and ruggedness are needed!

This body is designed for medium duty (sand, gravel and moderate excavating) applications. Its construction, mainly of 44W grade steel (3/16’’ to ¼’’), enables it to do the job. Furthermore, the floor center piece, made from AR200 steel, significantly increases the wear resistance factor and also provides proportional strength to sustain the stress during the loading process.

Galion

Galion 100U

The Galion 100U body is designed for superior service on 9900 -19500 GVWR cab/chassis’. The 100U features all 10 gauge high tensile steel floors, tailgate, head sheets and sides. Front corner posts, two intermediate side braces, full depth rear corner posts and boxed “material shedding” top rails are also standard..

Galion 130U

The Galion 130U body is designed for superior service on 9900 – 19500 GVWR cab/chassis’. This body features a 3/16″ high tensile steel floor, 10 gauge high tensile tailgate, head sheets and sides. Front corner posts, smooth sides, full depth rear corner posts, cross memberless understructure, and boxed “material-shedding” top rails are also standard.

Galion PLD

The Galion PLD body is designed for superior service on 12000 – 26000 GVWR cab/chassis’. It features all 10 gauge high tensile steel floors, tailgate, head sheets and single V brace sides. 10″ full depth rear corner posts and boxed “material-shedding” top rails are also standard. The PLD is designed to operate with scissor type conversion hoists.

Galion 400us

The Galion 400U smooth side body is especially designed for heavy-duty hauling requirements. It is well-suited for construction work, aggregate hauling and bucket loading. All units are built of tough high tensile steel to virtually outlast and outperform all others. Recommended for single axle underbody hoist applications.

Galion 400ut

The rugged design of the Galion 400U/T series body makes it ideal for heavy loading and hauling conditions. This product is suitable for contractor, municipal and other applications where durability is key. The 400U/T series is available with front mount telescopic or underbody hoist to meet your most demanding requirements..

Galion 400u

The Galion 450U is a heavy duty body that “beats the cold” during low temperature use with integral heat ducts. The 450U is well suited for aggregate hauling/spreading, construction and batching work…at any time of the year, anywhere on the globe! This heavy duty body features full depth rear corner posts and bolster, a 6-panel tailgate and continuous weld throughout.

Galion 500ut

The Galion 500U/T is excellent for over-the-highway aggregate hauling. It is also Ideal for construction and batching work, and for hauling and spreading stone, sand, gravel and other aggregates. Galion 500U/T series bodies utilize high tensile steel throughout for best resistance to abrasion. The Galion 500U/T is the largest of Galion’s steel body product line and can be used with underbody and telescopic hoists.

Dump Body Inquiry

13 + 2 =

Chose your dump body today!

At CTE we install any of these dump bodies on your chassis. From hydraulics to electrical we do it all. We are your one stop shop for installation. Fill out this form for more information.